购买电容并非是仅仅购买同一型号或者是同一类型的电容即可，而是要看很多实质性的因素。电容的购买是有一定技巧的，并非是人们所想的那么简单。电解电容厂家就来分享一下选购电容的小技巧有哪些。

　　The purchase of capacitor is not only to buy the same model or the same type of capacitor, but also depends on many substantive factors. Capacitor purchase is a certain skill, not as simple as people think. Electrolytic capacitor manufacturers to share the choice of capacitor tips which have.

　　采购电容之前首先要看品牌，主要有：三禾、三莹、NICHICON，RUBICON，RUBYCON（红宝石）、KZG、SANYO（三洋）、PANASONIC（松下）、NIPPON、FUJITSU（富士通），TAICON、G-LUXCON、TEAPO、CAPXON、OST、GSC、RLS等。

　　Before purchasing capacitors, you should first look at the brands, mainly including Sanhe, Sanying, Nichicon, Rubicon, Rubycon, kzg, Sanyo, Panasonic, Nippon, Fujitsu, taicon, g-luxcon, teapo, capxon, OST, GSC, RLS, etc.

　　一般说来日系电容性能比较好，在耐压、耐温、使用寿命等方面都比台系电容优秀，早期的电容"爆浆"事件，也没有发生在日系电容上，因此如果你要选择一块超频性、稳定性兼备的主板，不妨看看主板上的电容。

　　Generally speaking, the performance of Japanese series capacitors is better than that of Taiwan series capacitors in terms of withstand voltage, temperature resistance and service life. The early "slurry explosion" of capacitors did not occur on Japanese capacitors. Therefore, if you want to choose a motherboard with both overclocking and stability, you can look at the capacitance on the motherboard.

　　台系电容虽然性能相对稍差，不过如果主板的PCB设计、铜箔走线都较为规范，那么在使用中一般也不会出现什么问题，况且采用台系电容的主板超频性也不一定差。

　　Although the performance of the stage capacitor is relatively poor, if the PCB design and copper foil wiring of the motherboard are relatively standardized, there will be no problems in the use. Moreover, the overclocking performance of the main board using the stage capacitor is not necessarily poor.

　　其次要看容量和耐温值。主板电容的容量一般都是直接标注的，Intel要求CPU供电电路的滤波电容单个容量至少在1000μF以上，而现在的电容容量多在2000μF~4000μF之间，部分主板采用了容量为5000μF的电容，内存槽附近的电容容量多在1000μF~1500μF之间，容量较小的电容很难提供给CPU、内存以充足的纯净电流，有些老式主板升级CPU后出现的不兼容问题实际也源于此。

　　Secondly, it depends on the capacity and temperature resistance. The capacity of the main board capacitor is generally directly labeled. Intel requires that the filter capacitor of CPU power supply circuit should have a single capacity of at least 1000 μ F. however, the current capacitance capacity is mostly between 2000 μ F and 4000 μ F. some mainboards use 5000 μ f capacitance, and the capacitance near the memory slot is mostly between 1000 μ F and 1500 μ F. it is difficult for Intel to provide sufficient capacity for CPU and memory The pure current, some old motherboard upgrade CPU after the incompatibility problem is actually from this.

　　耐温值在另一方面也说明了电容的品质，主板上的电容耐温值多为105℃，而如果你的主板电容耐温值为85℃，那多半是厂商过于节约材料的结果，低耐压值的电容在使用上没问题，不过当CPU处在超频状态时发生"爆浆"的几率会比较大。

　　On the other hand, the temperature resistance value also indicates the quality of the capacitor. The temperature resistance value of the capacitance on the motherboard is mostly 105 ℃. If the temperature resistance value of the capacitance on the motherboard is 85 ℃, it is mostly the result of the manufacturer's over saving of materials. The capacitor with low voltage withstand value has no problem in use, but when the CPU is in the state of overclocking, the probability of "slurry explosion" will be relatively large.

　　掌握购买电容的技巧，可以提升购买效率，并且有助于需求者减少不必要的开支。毕竟选择电容错误不仅会造成开支浪费，还会造成电子产品或者是设备的损坏。

　　Mastering the skills of purchasing capacitors can improve the purchasing efficiency and help the demanders reduce unnecessary expenses. After all, the wrong choice of capacitors will not only cause waste of expenses, but also cause damage to electronic products or equipment.